A Review of Phyto- and Microbial-remediation of indoor volatile organic compounds.

Volatile organic compounds (VOCs) are crucial air pollutants in indoor environments, emitted from building materials, furniture, consumer products, cleaning products, smoking, fuel combustion, cooking, and other sources. VOCs are also emitted from human beings via breath and whole-body skin. Some VOCs cause dermal/ocular irritation as well as gastrointestinal, neurological, cardiovascular, and/or carcinogenic damage to human health. Because people spend most of their time indoors, active control of indoor VOCs has garnered attention. Phytoremediation and microbial remediation, based on plant and microorganism activities, are deemed sustainable, cost-effective, and public-friendly technologies for mitigating indoor VOCs. This study presents the major sources of VOCs in indoor environments and their compositions. Various herbaceous and woody plants used to mitigate indoor VOCs are summarized and their VOCs removal performance is compared. Moreover, this paper reviews the current state of active phytoremediation and microbial remediation for the control of indoor VOCs, and discusses future directions.

Implications of PM2.5 chemical composition in modulating microbial community dynamics during spring in Seoul.

Particulate matter with an aerodynamic diameter of 2.5 µm or less (PM2.5) harbors a diverse microbial community. To assess the ecological dynamics and potential health risks associated with airborne microorganisms, it is crucial to understand the factors influencing microbial communities within PM2.5. This study investigated the influence of abiotic parameters, including air pollutants, PM2.5 chemical composition (water-soluble ions and organics), and meteorological variables, on microbial communities in PM2.5 samples collected in Seoul during the spring season. Results revealed a significant correlation between air pollutants and water-soluble ions of PM2.5 with microbial α-diversity indices. Additionally, air pollutants exerted a dominant effect on the microbial community structure, with stronger correlations observed for fungi than bacteria, whereas meteorological variables including temperature, pressure, wind speed, and humidity exerted a limited influence on fungal α-diversity. Furthermore, the results revealed specific water-soluble ions, such as SO42-, NO3-, and NH4+, as important factors influencing fungal α-diversity, whereas K+ negatively correlated with both microbial α-diversity. Moreover, PM2.5 microbial diversity was affected by organic compounds within PM2.5, with fatty acids exhibited a positive correlation with fungal diversity, while dicarboxylic acids exhibited a negative correlation with it. Furthermore, network analysis revealed direct links between air pollutants and dominant bacterial and fungal genera. The air pollutants exhibited a strong correlation with bacterial genera, such as Arthrospira and Clostridium, and fungal genera, including Aureobasidium and Cladosporium. These results will contribute to our understanding of the ecological dynamics of airborne microorganisms and provide insights into the potential risks associated with PM2.5 exposure.

Direct imaging of magnetohydrodynamic wave mode conversion near a 3D null point on the sun.

Mutual conversion of various kinds of magnetohydrodynamic (MHD) waves can have profound impacts on wave propagation, energy transfer, and heating of the solar chromosphere and corona. Mode conversion occurs when an MHD wave travels through a region where the Alfvén and sound speeds are equal (e.g., a 3D magnetic null point). Here we report the direct extreme ultraviolet (EUV) imaging of mode conversion from a fast-mode to a slow-mode MHD wave near a 3D null point using Solar Dynamics Observatory/Atmospheric Imaging Assembly (SDO/AIA) observations. An incident fast EUV wavefront associated with an adjacent eruptive flare propagates laterally through a neighboring pseudostreamer. Shortly after the passage of the fast EUV wave through the null point, a slow-mode wave appears near the null that propagates upward along the open structures and simultaneously downward along the separatrix encompassing the fan loops of the pseudostreamer base. These observations suggest the existence of mode conversion near 3D nulls in the solar corona, as predicted by theory and MHD simulations. Moreover, we observe decaying transverse oscillations in both the open and closed structures of the pseudostreamer, along with quasiperiodic type III radio bursts indicative of repetitive episodes of electron acceleration.

Comparative analysis of hydrogen production and bacterial communities in mesophilic and thermophilic consortia using multiple inoculum sources.

This study investigates the hydrogen (H2) production performance and bacterial communities in mesophilic (37 °C) and thermophilic (50 °C) H2-producing consortia derived from different inoculum sources and utilizing food waste as a substrate. This study found notable variations in H2 production characteristics among these consortia. Among the mesophilic consortia (MC), the W-MC obtained with wetland (W) as the inoculum source exhibited the highest hydrogen production (3900 mL·L-1 and 117 mL·L-1·h-1), while among the thermophilic consortia (TC), the FP-TC obtained with forest puddle sediment (FP) as the inoculum source showed the highest performance (2112 mL·L-1 and 127 mL·L-1·h-1). This study reveals that the choice of inoculum source plays a crucial role in determining hydrogen production efficiency. Furthermore, the bacterial community analysis demonstrated varying microbial diversity and richness in different inoculum sources. Clostridium, a well-known H2-producing bacterium, was found in both mesophilic and thermophilic consortia and showed a positive correlation with H2 production. Other bacteria, such as Sporanaerobacter, Caproiciproducens, and Caldibacillus, also exhibited significant correlations with H2 production, suggesting their potential roles in the process. The study highlights the complex interactions between bacterial communities and hydrogen production performance, shedding light on the critical factors influencing this renewable energy source. Overall, this study contributes to our understanding of the microbial ecology and the factors affecting hydrogen production in different temperature conditions, which can have practical implications for optimizing biohydrogen production processes using organic waste substrates.

Long-term comparison of the performance of biostimulation and phytoextraction in soil contaminated with diesel and heavy metals.

The long-term remediation performance under the natural conditions is required to establish the appropriate remediation strategy for contaminated soil. The objective of this study was to compare the long-term remediation efficiency of biostimulation and phytoextraction in contaminated soil containing petroleum hydrocarbons (PHs) and heavy metals. Two types of contaminated soil (soil contaminated with diesel only and co-contaminated with diesel and heavy metals) were prepared. For the biostimulation treatments, the soil was amended with compost, whereas maize, a representative phytoremediation plant, was cultivated for the phytoextraction treatments. There was no significant difference in remediation performance of biostimulation and phytoextraction in the diesel-contaminated soil, in which the maximum total petroleum hydrocarbon (TPH) removability was 94-96% (p < 0.05). However, phytoextraction exhibited the higher removability for TPH and heavy metals than biostimulation in the co-contaminated soil. There was no considerable change in the TPH removal in biostimulation (16-25%), while phytoextraction showed a 75% of TPH removal rate in the co-contaminated soil. Additionally, no significant changes were observed in heavy metals concentration of biostimulation, whereas the removability of heavy metals was 33-63% in phytoextraction. Meanwhile, maize, which is a suitable plant for phytoextraction, showed a translocation factor (translocating efficiency from roots to shoots) value of >1. Correlation analysis revealed that soil properties (pH, water content, and organic content) negatively correlated with pollutants removal. Additionally, the soil bacterial communities were changed over the investigated period, and the types of pollutants exerted a significant influence on the bacterial community dynamics. This study performed a pilot-scale comparison of two types of biological remediation technologies under natural environmental conditions and provided information on changes in the bacterial community structures. This study can be useful for establishing appropriate biological remediation methods to restore soil contaminated with PHs and heavy metals.

Inoculation Effect of Methanotrophs on Rhizoremediation Performance and Methane Emission in Diesel-Contaminated Soil.

During the rhizoremediation of diesel-contaminated soil, methane (CH4), a representative greenhouse gas, is emitted as a result of anaerobic metabolism of diesel. The application of methantrophs is one of solutions for the mitigation CH4 emissions during the rhizoremediation of diesel-contaminated soil. In this study, CH4-oxidizing rhizobacteria, Methylocystis sp. JHTF4 and Methyloversatilis sp. JHM8, were isolated from rhizosphere soils of tall fescue and maize, respectively. The maximum CH4 oxidation rates for the strains JHTF4 and JHM8 were 65.8 and 33.8 mmol·g-DCW-1·h-1, respectively. The isolates JHTF4 and JHM8 couldn't degrade diesel. The inoculation of the isolate JHTF4 or JHM8 significantly enhanced diesel removal during rhizoremediation of diesel-contaminated soil planted with maize for 63 days. Diesel removal in the tall fescue-planting soil was enhanced by inoculating the isolates until 50 days, while there was no significant difference in removal efficiency regardless of inoculation at day 63. In both the maize and tall fescue planting soils, the CH4 oxidation potentials of the inoculated soils were significantly higher than the potentials of the non-inoculated soils. In addition, the gene copy numbers of pmoA, responsible for CH4 oxidation, in the inoculated soils were significantly higher than those in the non-inoculated soils. The gene copy numbers ratio of pmoA to 16S rDNA (the ratio of methanotrophs to total bacteria) in soil increased during rhizoremediation. These results indicate that the inoculation of Methylocystis sp. JHTF4 and Methyloversatilis sp. JHM8, is a promising strategy to minimize CH4 emissions during the rhizoremediation of diesel-contaminated soil using maize or tall fescue.

Dynamics of Functional Genes and Bacterial Community during Bioremediation of Diesel-Contaminated Soil Amended with Compost.

Compost is widely used as an organic additive to improve the bioremediation of diesel-contaminated soil. In this study, the effects of compost amendment on the remediation performance, functional genes, and bacterial community are evaluated during the bioremediation of diesel-contaminated soils with various ratios of compost (0-20%, w/w). The study reveals that the diesel removal efficiency, soil enzyme (dehydrogenase and urease) activity, soil CH4 oxidation potential, and soil N2O reduction potential have a positive correlation with the compost amendment (p < 0.05). The ratios of denitrifying genes (nosZI, cnorB and qnorB) to 16S rRNA genes each show a positive correlation with compost amendment, whereas the ratio of the CH4-oxidizing gene (pmoA) to the 16S rRNA genes shows a negative correlation. Interestingly, the genera Acidibacter, Blastochloris, Erythrobacter, Hyphomicrobium, Marinobacter, Parvibaculum, Pseudoxanthomonas, and Terrimonas are strongly associated with diesel degradation, and have a strong positive correlation with soil CH4 oxidation potential. Meanwhile, the genera Atopostipes, Bacillus, Halomonas, Oblitimonas, Pusillimonas, Truepera, and Wenahouziangella are found to be strongly associated with soil N2O reduction potential. These results provide useful data for developing technologies that improve diesel removal efficiency while minimizing greenhouse gas emissions in the bioremediation process of diesel-contaminated soil.

Effect of Novosphingobium sp. CuT1 inoculation on the rhizoremediation of heavy metal- and diesel-contaminated soil planted with tall fescue.

Rhizoremediation is a promising method based on the synergism between plant and rhizobacteria to remediate soil co-contaminated with heavy metals and total petroleum hydrocarbons (TPHs). A plant growth-promoting (PGP) rhizobacterium with diesel-degrading capacity and heavy metal tolerance was isolated from the rhizosphere of tall fescue (Festuca arundinacea L.), after which the effects of its inoculation on rhizoremediation performance were evaluated in heavy metal- and diesel-contaminated soil planted with tall fescue. The bacterial isolate (Novosphingobium sp. CuT1) was characterized by its indole-3-acetic acid (IAA) production, 1-aminocyclopropane-1-carboxylic acid (ACC) deaminase activity, and siderophore productivity as PGP traits. CuT1 was able to grow on 1/10 LB-agar plates containing 5 mM of Cu or 5 mM of Pb. To evaluate the remediation effect of heavy metal- and diesel-contaminated soil by CuT1 inoculation, the experimental conditions were prepared as follows. The soil was artificially contaminated with heavy metals (Cu and Pb) at a final concentration of 500 ppm. The soil was then further contaminated with diesel at final concentrations of 0, 10,000, and 30,000 ppm. Finally, all plots were planted with tall fescue, a representative hyperaccumulating plant. Compared to the rhizoremediation performance of the co-contaminated soil (Cu + Pb + diesel) without inoculation, the bioavailable Cu concentrations in the soil and the tall fescue biomass were significantly increased in CuT1 inoculation. Additionally, the root growth of tall fescue was also promoted in CuT1 inoculation. Correlation analysis showed that Cu bioavailability and bioconcentration factor were positively correlated with CuT1 inoculation. The diesel removal efficiency showed a positive correlation with CuT1 inoculation, although the diesel removal was below 30%. CuT1 inoculation was positively correlated with IAA and dehydrogenase activity in the soil. Moreover, the dry biomass of the tall fescue's roots was highly associated with CuT1 inoculation. Collectively, our findings suggest that Novosphingobium sp. CuT1 can be utilized as an applicable bioresource to enhance rhizoremediation performance in heavy metal- and TPH-contaminated soils.

Interferometric Imaging, and Beam-Formed Study of a Moving Type-IV Radio Burst with LOFAR.

Type-IV radio bursts have been studied for over 50 years. However, the specifics of the radio emission mechanisms is still an open question. In order to provide more information about the emission mechanisms, we studied a moving Type-IV radio burst with fine structures (spike group) by using the high-resolution capability of the Low-Frequency Array (LOFAR) on August 25, 2014. We present a comparison of Nançay Radioheliograph (NRH) and the first LOFAR imaging data of the Type-IV radio burst. The degree of circular polarization (DCP) is calculated at frequencies in the range 20 - 180 MHz using LOFAR data, and it was found that the value of DCP gradually increased during the event, with values of 20 - 30%. LOFAR interferometric data were combined with white-light observations in order to track the propagation of this Type-IV burst. The kinematics shows a westward motion of the radio sources, slower than the CME leading edge. The dynamic spectrum of LOFAR shows a large number of fine structures with durations of less than 1 s and high brightness temperatures ( T B ), i.e., 10 12 - 10 13 K. The gradual increase of DCP supports gyrosynchrotron emission as the most plausible mechanism for the Type IV. However, coherent emissions such as Electron Cyclotron Maser (ECM) instability may be responsible for small-scale fine structures. Countless fine structures altogether were responsible for such high T B . Supplementary Information: The online version contains supplementary material available at 10.1007/s11207-022-02042-0.

Inoculation effect of Pseudomonas sp. TF716 on N2O emissions during rhizoremediation of diesel-contaminated soil.

The demand for rhizoremediation technology that can minimize greenhouse gas emissions while effectively removing pollutants in order to mitigate climate change has increased. The inoculation effect of N2O-reducing Pseudomonas sp. TF716 on N2O emissions and on remediation performance during the rhizoremediation of diesel-contaminated soil planted with tall fescue (Festuca arundinacea) or maize (Zea mays) was investigated. Pseudomonas sp. TF716 was isolated from the rhizosphere soil of tall fescue. The maximum N2O reduction rate of TF716 was 18.9 mmol N2O g dry cells-1 h-1, which is superior to the rates for previously reported Pseudomonas spp. When Pseudomonas sp. TF716 was added to diesel-contaminated soil planted with tall fescue, the soil N2O-reduction potential was 2.88 times higher than that of soil with no inoculation during the initial period (0-19 d), and 1.08-1.13 times higher thereafter. However, there was no enhancement in the N2O-reduction potential for the soil planted with maize following inoculation with strain TF716. In addition, TF716 inoculation did not significantly affect diesel degradation during rhizoremediation, suggesting that the activity of those microorganisms involved in diesel degradation was unaffected by TF716 treatment. Analysis of the dynamics of the bacterial genera associated with N2O reduction showed that Pseudomonas had the highest relative abundance during the rhizoremediation of diesel-contaminated soil planted with tall fescue and treated with strain TF716. Overall, these results suggest that N2O emissions during the rhizoremediation of diesel-contaminated soil using tall fescue can be reduced with the addition of Pseudomonas sp. TF716.

Seasonal Dynamics of Bacterial Community Structure in Diesel Oil-Contaminated Soil Cultivated with Tall Fescue (Festuca arundinacea).

The objective of this study was to explore the seasonal characteristics of rhizoremediation and the bacterial community structure over the course of a year in soil contaminated with diesel oil. The soil was contaminated with diesel oil at a total petroleum hydrocarbon (TPH) concentration of 30,000 mg-TPH·kg-soil-1. Tall fescue seedlings were planted in the contaminated soil and rhizoremediation performance was monitored for 317 days. The TPH concentration gradually declined, reaching 75.6% after day 61. However, the TPH removability decreased by up to 30% after re-contamination in the fall and winter. The bacterial community structure exhibited distinct seasonal dynamics. Genus Pseudomonas significantly increased up to 55.7% in the winter, while the genera Immundisolibacter and Lysobacter, well-known petroleum hydrocarbon (PH)-degrading bacteria, were found to be positively linked to the TPH removal rate. Consequently, knowledge of this seasonal variation in rhizoremediation performance and the bacterial community structure is useful for the improvement of rhizoremediation in PH-contaminated environments.

Dynamics of bacterial functional genes and community structures during rhizoremediation of diesel-contaminated compost-amended soil.

The objective of this study was to characterize the effects of organic soil amendment (compost) on bacterial populations associated with petroleum hydrocarbon (PH) degradation and nitrous oxide (N2O) dynamics via pot experiments. Soil was artificially contaminated with diesel oil at total petroleum hydrocarbon (TPH) concentration of 30,000 mg·kg-soil-1 and compost was mixed with the contaminated soil at a 1:9 ratio (w/w). Maize seedlings were planted in each pot and a total of ten pots with two treatments (compost-amended and unamended) were prepared. The pot experiment was conducted for 85 days. The compost-amended soil had a significantly higher TPH removal efficiency (51.1%) than unamended soil (21.4%). Additionally, the relative abundance of the alkB gene, which is associated with PH degradation, was higher in the compost-amended soil than in the unamended soil. Similarly, cnorB and nosZ (which are associated with nitric oxide (NO) and N2O reduction, respectively) were also highly upregulated in the compost-amended soil. Moreover, the compost-amended soil exhibited higher richness and evenness indices, indicating that bacterial diversity was higher in the amended soil than in the unamended soil. Therefore, our findings may contribute to the development of strategies to enhance remediation efficiency and greenhouse gas mitigation during the rhizoremediation of diesel-contaminated soils.

Effect of upflow and downflow baffle configuration on particulate matter removal in a mirror-symmetrical multi-compartment scrubber.

Control over particulate matter (PM) emission from grilling is required for improving public health and air quality. The performance of mirror-symmetrical multi-compartment scrubbers with an upflow (U-type) and downflow baffle (D-type) configuration was evaluated for PM emission control from grilling at a flow rate of 30 m3 min-1. The PM removal efficiency of the U-type scrubber was the highest when the water level was 8 cm (95.6%), and the pressure drops recorded at the water levels of 6, 8 and 10 cm were 103, 122 and 153 mmH2O, respectively. Although PM removal efficiency of the D-type scrubber was over 91.0% at the water levels of 8, 10 and 12 cm, the pressure drops were 124, 142 and 185 mmH2O, respectively. A comprehensive evaluation of the water volume, pressure drop and PM removal performance, as well as device size, revealed that the U-type scrubber with a PM removal efficiency of 92% or higher and a pressure drop of 122 mmH2O or lower at the water levels of 6-8 cm was more economical for removing PM from grilling gas than the D-type scrubber.

Characterization of the Bacterial Community Associated with Methane and Odor in a Pilot-Scale Landfill Biocover under Moderately Thermophilic Conditions.

A pilot-scale biocover was constructed at a sanitary landfill and the mitigation of methane and odor compounds was compared between the summer and non-summer seasons. The average inlet methane concentrations were 22.0%, 16.3%, and 31.3%, and the outlet concentrations were 0.1%, 0.1%, and 0.2% during winter, spring, and summer, respectively. The odor removal efficiency was 98.0% during summer, compared to 96.6% and 99.6% during winter and spring, respectively. No deterioration in methane and odor removal performance was observed even when the internal temperature of the biocover increased to more than 40°C at midday during summer. During summer, the packing material simultaneously degraded methane and dimethyl sulfide (DMS) under both moderately thermophilic (40-50°C) and mesophilic conditions (30°C). Hyphomicrobium and Brevibacillus, which can degrade methane and DMS at 40°C and 50°C, were isolated. The diversity of the bacterial community in the biocover during summer did not decrease significantly compared to other seasons. The thermophilic environment of the biocover during summer promoted the growth of thermotolerant and thermophilic bacterial populations. In particular, the major methane-oxidizing species were Methylocaldum spp. during summer and Methylobacter spp. during the nonsummer seasons. The performance of the biocover remained stable under moderately thermophilic conditions due to the replacement of the main species and the maintenance of bacterial diversity. The information obtained in this study could be used to design biological processes for methane and odor removal during summer and/or in subtropical countries.

Effects of Plant and Soil Amendment on Remediation Performance and Methane Mitigation in Petroleum-Contaminated Soil.

Petroleum-contaminated soil is considered among the most important potential anthropogenic atmospheric methane sources. Additionally, various rhizoremediation factors can affect methane emissions by altering soil ecosystem carbon cycles. Nonetheless, greenhouse gas emissions from soil have not been given due importance as a potentially relevant parameter in rhizoremediation techniques. Therefore, in this study we sought to investigate the effects of different plant and soil amendments on both remediation efficiencies and methane emission characteristics in dieselcontaminated soil. An indoor pot experiment consisting of three plant treatments (control, maize, tall fescue) and two soil amendments (chemical nutrient, compost) was performed for 95 days. Total petroleum hydrocarbon (TPH) removal efficiency, dehydrogenase activity, and alkB (i.e., an alkane compound-degrading enzyme) gene abundance were the highest in the tall fescue and maize soil system amended with compost. Compost addition enhanced both the overall remediation efficiencies, as well as pmoA (i.e., a methane-oxidizing enzyme) gene abundance in soils. Moreover, the potential methane emission of diesel-contaminated soil was relatively low when maize was introduced to the soil system. After microbial community analysis, various TPH-degrading microorganisms (Nocardioides, Marinobacter, Immitisolibacter, Acinetobacter, Kocuria, Mycobacterium, Pseudomonas, Alcanivorax) and methane-oxidizing microorganisms (Methylocapsa, Methylosarcina) were observed in the rhizosphere soil. The effects of major rhizoremediation factors on soil remediation efficiency and greenhouse gas emissions discussed herein are expected to contribute to the development of sustainable biological remediation technologies in response to global climate change.

Evaluation of rhizoremediation and methane emission in diesel-contaminated soil cultivated with tall fescue (Festuca arundinacea).

Rhizoremediation, CH4 emission, and bacterial community dynamics were evaluated in diesel-contaminated soil cultivated with tall fescue via a pot experiment. At the beginning of the experiment, total petroleum hydrocarbons (TPHs) removal efficiency was 30.2% in tall fescue-cultivated soil, which was significantly higher than that of unplanted soil (19.4%). However, when compost was added as a soil amendment, TPHs removal efficiency increased to 39.2% in tall fescue-cultivated soil. Interestingly, potential CH4 emissions were more affected by the initial diesel concentration than by compost addition or tall fescue planting. Specifically, the potential CH4 emission was approximately 3.8 times higher in the treatment with the highest initial diesel concentration (T-WC38) than that of the treatment with the lowest initial diesel concentration (T-WC5). Functional gene analysis revealed that TPHs removal had a linear correlation with the alkB/16S gene ratio, whereas potential CH4 emission had a linear correlation with pmoA gene copy numbers. Initial diesel concentrations in soil also affected bacterial community structures and the genera Rhizobium, Halothiobacillus, and Geobacter were found to be positively linked to diesel-contaminated soil rhizoremediation. Therefore, this study provides useful insights into the development of strategies to enhance rhizoremediation efficiency and CH4 emission mitigation in diesel-contaminated soils.

Characterization of nitrous oxide reduction by Azospira sp. HJ23 isolated from advanced wastewater treatment sludge.

A new nitrous oxide (N2O)-reducing bacterium was isolated from a consortium that was enriched using advanced wastewater treatment sludge as an inoculum and N2O as the sole nitrogen source. The isolated facultative anaerobe was identified as Azospira sp. HJ23. Azospira sp. HJ23 exhibited optimum N2O-reducing activity with a C/N ratio of 62 at pH 6 in the temperature range of 37 °C to 40 °C. The optimum carbon source for N2O reduction was a mixture of glucose and acetate. The maximum rate of N2O reduction by Azospira sp. HJ23 was 4.8 mmol·g-dry cell-1·h-1, and its N2O-reducing activity was higher than other known N2O reducers. Azospira sp. HJ23 possessed several functional genes for denitrification. These included narG (NO3- reductase), nirK (NO2- reductase), norB (NO reductase), and nosZ (N2O reductase) genes. These results suggest that Azospira sp. HJ23 can be applied in the denitrification process to minimalize N2O emission.

Removal of particulate matter from pork belly grilling gas using an orifice wet scrubber.

Grilling restaurants are a major contributor to airborne particulate matter (PM) in metropolitan areas. In this study, the removal of PM during the grilling of pork belly using an orifice scrubber, which is a form of gas-induced spray scrubber, was assessed. During grilling, the particle mass concentration was the highest for 1.0 < PM ≤ 2.5 µm (55.5% of total PM emissions), followed by 0.5 < PM ≤ 1.0 (27.1%), PM ≤ 0.5 (10.7%), and PM > 2.5 µm (7.0%). The PM removal efficiency of the orifice scrubber at a gas flow of 4.5 m3 min-1 was > 99.7% for PM ≥ 2.5 µm, 89.4% for 1.0 < PM ≤ 2.5 µm, 62.1% for 0.5 < PM ≤ 1.0, and 36.5% for PM ≤ 0.5 µm. Although further research is necessary to optimize its use, the orifice scrubber offers a user-friendly technology for the control of PM in small grilling restaurants because of its simple design, uncomplicated operation, and satisfactory PM removal performance.

Characterization of sludge reduction and bacterial community dynamics in a pilot-scale multi-stage digester system with prolonged sludge retention time.

Sludge reduction performance and bacterial community dynamics in a pilot-scale multi-stage digester system with prolonged sludge retention time were characterized. Throughout the operation period of 281 days, the total loading sludge and the total digested sludge were 4700 and 3300 kg-MLSS. After 114 days of operation, the residual MLSS (RMLSS) in the reactors for sludge treatment was maintained at 18-25 kg-RMLSS m-3, and the sludge reduction efficiency achieved 95% under the F/M ratio (kg-loading MLSS kg-RMLSS-1) of less than 0.018. Also, among the sludge components, both fixed suspended solids and volatile suspended solids were reduced. Based on the sludge reduction performance and the RNA-based bacterial community characteristics, the combined action of the maintenance metabolism, lysis-cryptic growth, and particulate inorganic matter is proposed as the sludge reduction mechanism in the multi-stage sludge treatment process.

Emission characteristics of particulate matter, odors, and volatile organic compounds from the grilling of pork.

Meat-grilling restaurants are considered to be residential emission sources of air pollutants. To investigate the emission characteristics of particulate matter (PM), odors, and volatile organic compounds (VOCs) from the grilling of meat, a grilling apparatus equipped with butane gas burners was used to grill pork belly and marinated pork ribs in a laboratory setting. When grilling the pork belly, the emission factor for PM with a diameter of 2.5 µm or below (PM2.5) was 754 mg-PM·kg-meat-1, accounting for 99% of total suspended particles (TSPs), while that of the marinated pork ribs was 137 mg-PM·kg-meat-1 (96% of TSPs). Ammonia and acetaldehyde were the most common odors emitted during grilling at 43-88 mg·kg-meat-1 and 22-30 mg·kg-meat-1, respectively. Aldehydes were the most significant contributor to total odor intensity (36%-67%). Benzene, vinyl acetate, and hexene were the most abundant VOCs for the pork belly, while butane, vinyl acetate, and n-dodecane were the most abundant for the marinated ribs. Among the VOCs emitted from the pork grilling process, hexene, butane, and toluene were the dominant ozone precursors. The information obtained in this study is useful for furthering the understanding of the characteristics of air pollutants emitted from actual meat-grilling restaurants. Additionally, knowledge of the PM, odor, and VOC emission characteristics and their emission factors is useful for establishing management strategies for air pollutants from meat-grilling restaurants.